Bismuth was evaluated as internal standard for Pb determinations and showed usefulness to minimize variations due to changes in the experimental conditions of the inductively coupled plasma optical emission spectrometry (ICP OES), inductively coupled plasma mass spectrometry (ICP-MS) and electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS). Thirty four samples were analyzed and the Pb contents obtained by ICP-MS and ETV-ICP-MS were in agreement at 95% confidence level. Plant, biological tissue and soil reference materials were also analyzed and the results were close to certified values upon the use of the internal standard. Recoveries for Pb spikes (ICP OES: 95-110%; ICP-MS: 95-106%; ETV-ICP-MS: 92-119%) were better than those obtained with external calibration (ICP OES: 56-91%; ICP-MS: 36-136%; ETV‑ICP-MS: 5-123%). The relative standard deviations (n = 12) was improved from 1-9% to 0.2-6% (ICP OES), from 0.5-11% to 0.1-7% (ICP-MS) and from 0.4-7% to 0.1-4% (ETV‑ICP‑MS) by using external and internal standard calibrations, respectively.

A espectrometria de absorção atômica em forno de grafite de alta resolução com fonte contínua (HR-CS GF AAS) é proposta para determinar Pb em sombra de olho e blush empregando a análise direta de sólidos. O emprego da mistura de modificadores químicos Pd(NO3)2 + Mg(NO3)2 possibilitou a calibração aquosa de 0,25 a 2,5 ng Pb (r = 0,998). O desempenho do método proposto foi avaliado por meio da análise de digeridos de sombra e de blush por espectrometria de absorção atômica em forno de grafite com fonte de linhas (LS GF AAS) como técnica comparativa. Os resultados obtidos por HR-CS GF AAS e LS GF AAS foram concordantes entre si a um nível de confiança de 95% (teste t pareado). O limite de quantificação (massa seca) foi de 0,020 ng mg–1. A concentração de Pb nas amostras de sombra de olho e de blush variou de 1,222 a 9,632 ng mg–1 e 0,362 a 28,091 ng mg–1, respectivamente.

Direct solid sampling is proposed for Pb determination in eye shadow and blush samples by high-resolution continuum source graphite furnace atomic absorption spectrometry (HR-CS GF AAS). A mixture of Pd(NO3)2 + Mg(NO3)2 was employed as chemical modifier, and aqueous calibration (0.25-2.5 ng Pb, r = 0.998) was obtained. Accuracy of the determination of Pb in eye shadow and blush samples by the proposed method was verified by line source graphite furnace AAS as a comparative technique employing digested samples. The results obtained by the two methods were in agreement at a 95% confidence level (paired t-test). The limit of quantification (dry mass) was 0.020 ng mg–1. The Pb content in the eye shadow and blush samples varied between 1.222 and 9.632 ng mg–1 and 0.362 and 28.091 ng mg–1, respectively.

Um sistema em fluxo acoplado a espectrômetro de absorção atômica com chama (FIA-FAAS) foi desenvolvido para determinação de taninos em amostras de feijão guandu, explorando a reação de precipitação entre os taninos e proteínas. Extratos obtidos pela sonicação das amostras com solução de metanol 50% (v/v), foram introduzidos no sistema e induzidos à reação com hemoglobina, sendo o precipitado produzido pela reação retido em um filtro localizado no percurso analítico. Solução 1% (m/v) dodecil sulfato de sódio, fluindo em sentido inverso ao fluxo de filtração, foi empregado para solubilizar e conduzir o complexo tanino-hemoglobina ao detector, espectrômetro de absorção atômica com chama, para quantificação dos íons ferro presentes na estrutura da hemoglobina. Uma solução de ácido tânico foi utilizada para construção da curva analítica. O método proposto apresentou freqüência analítica de 30 amostras por hora, desvio padrão relativo de 9,7 % (n=10) e limite de quantificação 0,27 mg L-1 de ácido tânico.

A flow system, coupled with flame atomic absorption spectrometry (FIA-FAAS), was developed for tannin determination in pigeon pea samples, exploring the precipitation reaction between tannins and proteins. Sample extracts obtained by sonication with a 50% (v/v) methanol solution were introduced into the system and induced to react with a hemoglobin solution. The precipitate produced was retained on a filter located in the analytical flow. A reversed flow of 1% (w/v) sodium dodecyl sulfate solution was used for solubilization of the precipitate from the filter and to conduct the tannin-hemoglobin complex to the FAAS, to quantify the iron ions present in the hemoglobin structure. A tannic acid solution was used to prepare the analytical curve. The proposed method allowed determination of 30 samples per hour, a standard deviation of 9.7% (n=10), and a quantification limit of 0.27 mg L-1 for tannic acid.